Art. No. 25-025-40-07 CranioXpand, template for marking

Art. No. 25-025-42-07 CranioXpand, insertion instrument, spring opening to the front

Art. No. 25-025-43-07 CranioXpand, insertion instrument, spring opening to the rear

Art. No. 25-025-44-07 CranioXpand, instrument for removing springs

Art. No. 25-025-45-07 CranioXpand, instrument for lifting springs

Art. No. 25-025-52-07 CranioXpand, selection instrument, Ø 1.2 mm

Art. No. 50-126-06-07 Drill for X-Fix fixation screw

Art. No. 51-400-01-07 Activation arm disconnection forceps, total length 15.5 cm

Art. No. 51-400-02-07 Cutter, total length 18 cm

Art. No. 51-400-03-07 Body holding forceps, total length 15.5 cm

Art. No. 51-400-04-07 Activator measuring device, total length 18 cm

Art. No. 51-400-05-09 Parallelization instrument (one instrument to be used per distractor)

Art. No. 51-509-90-07 Activation wire for symphysis distractor

Art. No. 51-555-90-07 Activation key for Rotterdam palatal distractor, field hockey stick-shaped

Art. No. 51-555-91-07 Wrench for counter nut

Art. No. 51-565-90-07 Activation key for Rapid Palatal Expander (RPE)

Art. No. 51-565-95-07 Flexible activation key for Rapid Palatal Expander (RPE)

Art. No. 55-925-10-04 CranioXpand instrument storage complete, without contents

Art. No. 55-962-08-04 Insert module with purple horizontal rails

Art. No. 55-962-18-04 Storage module with horizontal rails, purple

Art. No. 55-962-37-04 Double insert module, gray

Art. No. 55-962-38-04 Double insert module, purple

Art. No. 55-963-17-04 Lid for distractor module

Art. No. 55-963-18-04 Lid for Zurich II module distractor system

Art. No. 55-963-20-04 Lid for 3DX system

Art. No. 55-963-36-04 X-Fix lid for double insert module

Art. No. 55-963-39-04 X-Fix lid for instrument tray

Art. No. 55-964-20-04 Insert with 2-section compartment, deep, without contents

Art. No. 55-964-23-04 Insert for TRACK distractors

Art. No. 55-964-24-04 Insert with 2-part compartment, flat, without contents

Art. No. 55-964-25-04 Insert with 3-part compartment, flat, without contents

Art. No. 55-964-26-04 Empty insert for Zurich II system

Art. No. 55-964-33-04 3DX insert for complete units

Art. No. 55-964-34-04 3DX insert for individual components

Art. No. 55-964-61-04 X-Fix insert for clamps, height 14 mm

Art. No. 55-964-62-04 X-Fix insert for double insert, exposed, height 6 mm

Art. No. 55-964-65-04 X-Fix insert for pins Ø 4 mm/ Ø 3.2 mm and clamps, height 20 mm

Art. No. 55-964-99-04 X-Fix insert for pins Ø 4 mm, height 20 mm

Art. No. 55-969-39-04 X-Fix instrument tray, length 300 mm, width 450 mm, with fixation strips

Art. No. 55-969-45-04 X-Fix instrument tray complete, length 300 mm. width 450 mm